Gluing magnets is not overly hard, but you do need to have the right kind of glue. That said, there are so many different types of glue out there, that finding the right one for the job can be a challenge. Today, we are here to look at 6 products which we think are the best glues for magnets.
Click here to skip to our recommended pick!
- Good working time
- Solvent resistant
- Dries clear – can be sanded and finished
- Bonds virtually all materials
- Good impact resistance
- Easy to apply
- Great bond
- User-friendly
- Fast and efficient
- Works on virtually all materials
- Heat, water, and solvent proof
- Extreme impact resistance
- Metal, wood, plastic, paper, fabric, and more
- Thick formula
- Super fast drying
- Ideal for plastics
- 10 to 45 second dry time
- No clamping required
Our Overall #1 Rated Pick
The best type of glue for magnets is usually two-part epoxy, with the reason being that it forms a super strong bond that is highly resistant to solvents. Our overall number one rated pick for the best glue for magnets is Gorilla 2 Part Epoxy.
- Permanent bond
- 6 minute setting time
- 30 minute curing time
- Easy to use syringe
- Dries clear
- Can be finished
There are various reasons why we think that this Gorilla 2 Part Epoxy is the best option for gluing magnets to a wide array of materials. That is actually one of the big benefits here, that this glue can bond magnets, metals, plastics, ceramics, wood, paper, fabric, and much more, thus making it ideal for all sorts of crafts and construction purposes.
What you may also like about Gorilla 2 Part Epoxy is that it has a 6 minute working time, so you should have more than enough time to work with it before it begins to dry. Now, this stuff will dry and cure in about 30 minutes, which is good enough no doubt, but do keep in mind that it will require clamping.
Also keep in mind that the two components do need to be mixed, which can be a bit messy, but at least the syringe is easy to use. Another beneficial aspect of Gorilla 2 Part Epoxy is that it dries clear, and that it can be finished once dry. This is a very strong kind of glue that features great impact resistance and moisture resistance.
Glue for Magnets Buying Guide
Before you go out and buy just any old glue for your magnets, let’s take a look at some of the most important information that you need to know.
Types of Glue for Magnets
First and foremost, what you need to know is that there are different types of glue that you can use for magnets. Let’s take a closer look.
Two Part Epoxy
The first option at your disposal is two part epoxy, which is usually considered the best choice for magnets. Due to its formulation, it is ideal for bonding various materials including wood, metals, magnets, fabrics, plastics, ceramics, and much more.
Epoxy resin also doesn’t really shrink as it dries, it resists water and heat quite well, and it dries relatively fast too, and features good working time. That said, these need to be mixed, which can be messy, and they often require clamping too. That said, this type of glue doesn’t always have great impact resistance.
Super Glue
Super glue is another great choice to go with. Now, super glue can bond with most materials, all but the very smoothest of plastics, so you will want to avoid using it to bond metal to magnets, at least unless otherwise stated by the specific product.
Super glue is good because it is highly resistant to heat and moisture (for the most part), it dries super fast, and it doesn’t require clamping either. That said, super glue might be too thin for some applications (besides the gel kind), and the working time is so short that you might not have enough time to properly line up the components being glued.
Silicone Adhesive
Silicone adhesive is another option at your disposal. This option is great because silicone doesn’t shrink much as it dries, it can resist extreme temperatures, it is waterproof, and it has fantastic resistance to chemicals and solvents. On the other hand, silicone is not the best in terms of impact resistance and overall bond strength.
Liquid Nails
The fourth and final option at your disposal is Liquid Nails. Liquid nails is a professional grade adhesive that is ideal for construction purposes. One of the best aspects of it is that it has amazing grip strength, it forms a super strong bond, and it has great impact resistance too.
Moreover, it’s also resistant to rusting, it’s very easy to apply, it adheres very quickly, and it can be used on uneven surfaces too. That said, this stuff is hard to clean up, it’s super thick, and it does take quite some time to totally dry.
How to Glue Magnets
Let’s now talk about how to glue magnets to a wide range of materials, just to help make your life a little bit easier.
How to Glue Magnets to Metal
Here we have included a video on how to glue magnets to metal.
How to Glue Magnets to Glass
Here we have included a tutorial video on how to glue magnets to glass.
How to Glue Magnets to Fabric
Although we could not find a good video for this example, gluing magnets to fabric is not hard. As long as you have the right kind of glue, you just have to apply a small amount, clamp the fabric to the magnet, and that’s about it.
Safety Tips
To keep you safe when gluing magnets to anything, follow the tips as outlined below.
- Always wear gloves, especially when using something like super glue that can bond to your fingers within seconds.
- If you feel the need, wear safety goggles to protect your eyes.
- Wearing long sleeves to stop your arms from getting glued is not a bad idea either.
- When using strong adhesives, working in a well ventilated area is recommended.
The Best Glue for Magnets
The top best product [hide]
Gorilla 2 Part Epoxy
Gorilla 2 Part Epoxy is an easy to use two part epoxy that comes complete with an easy applicator syringe. Yes, it does need to be mixed, which can be a bit messy, but it’s not too bad.
This particular epoxy forms a very strong bond with various materials like wood, metals, ceramics, glass, plastics, and more, and yes, magnets too. It may not be great for large-scale applications, but it works well for small repairs, building purposes, and crafts.
Moreover, Gorilla 2 Part Epoxy is resistant to solvents, it’s heat resistant, and waterproof too. Once the two parts are mixed, you have 6 minutes of working time, which should be more than enough, and then it cures within about 30 minutes, but it will need some clamping.
- 6 minute setting time
- Easy to dispense syringe
- Dries clear
- Can be finished
Gorilla 7700104 Super Glue Gel
What is convenient about Gorilla 7700104 Super Glue Gel is that it features a no run formula, so it can be used on vertical applications.
Now, this stuff has nearly no working time, so you do need to be quick, but the fact that it can dry in as little as 15 seconds is convenient, not to mention that you don’t need to do any clamping either.
Gorilla 7700104 Super Glue Gel is formulated to handle a lot of weight, and it has great impact resistance too.
The small applicator bottle with the applicator nozzle makes accurate application of the glue very easy. This stuff can bond plastic, wood, metal, ceramic, rubber, leather, paper, and more (although not all types of plastic).
- 45 second dry time
- No run formula
- Great impact resistance
DIYMAG Neodymium Disc Magnets with Adhesive
The magnets themselves look good, they are rust resistant, and each one can hold up to 12 pounds, which is not too bad at all. What is also nice is that the adhesive used here can bond with virtually any material, and once the bond is made, it is nearly impossible to undo.
- Magnets + Adhesive
- Easy to use
Liquid Nails Extreme Heavy Duty Construction Adhesive
When it comes down to it, this is some awesome heavy duty adhesive that can bond magnets, wood, metal, glass, ceramic, tile, and so much more. The fact that it comes in a caulking tube makes it very easy to apply, especially when it comes to covering large surfaces.
- All weather performance
- Very strong bond
- Bonds most materials
Gorilla 103859 Micro Precise Super Glue
- Thick formula
- Precise applicator tip
- 10 to 45 second drying time
Loctite 681925-6 Super Glue Plastics Bonding System
- Great for bonding plastics
- Very fast drying
- No clamping required
Conclusion
The bottom line here is that the number one best glue for magnets is Gorilla 2 Part Epoxy. This is true for many reasons, and while it may have a couple of drawbacks, it does form a strong bond, it’s very resistant to weather and solvents, it’s relatively easy to work with, and it bonds virtually all materials too.
