Learn How to Remove A Pop Socket Safely & Quickly with this ultimate guide: Popsockets are popular phone accessories that make it easier to grip your phone and prop it up for easier viewing.
While they are convenient for everyday use, there may be times when you need to remove them, whether it’s to replace the design, clean the adhesive, or switch it to a new phone.
Here is a step-by-step guide with tips and tricks, and FAQs to help you safely and quickly remove your Popsocket.
Step-by-Step Instructions to Remove Popsocket
Removing a Popsocket from your device is an easy process. The first step is to lift the base of the popsocket away from the surface it is attached to.
You may be required to use gentle prying pressure to remove it, depending how firmly it has been affixed. Once separated, continue to grip the Popsocket and gradually pull it away from your device.
Before reattaching or replacing your new Popsocket, be sure to clean any residue or glue off of your smartphone using a household cleaner and/or rubbing alcohol.
Doing so ensures that your new PopSocket can be firmly adhered and also prevent dirt from accumulating underneath the adhesive tab of the PopSocket.
Following these simple steps will ensure your PopSocket is safely removed and help you get on enjoying its benefits as quickly as possible!
How do you remove a Pop Socket Cover?
If your Popsocket has a cover, carefully remove it by sliding it off from the top.
- Use your fingernail or a small flat tool to gently pry the top of the Popsocket away from your phone. Do not use too much force or twist it as this can damage the phone or the Popsocket.
- Once you’ve created enough space between the Popsocket and the phone, gently lift it up using your fingers. Again, do not use force as this can damage the adhesive or your phone.
- If there is any adhesive residue left on your phone, use rubbing alcohol to remove it. Make sure to let the area dry completely before applying a new Popsocket.
How to Remove a Pop Socket Top?
- Start by cleaning the area around your Popsocket with rubbing alcohol. This will ensure that the adhesive is free of any oils or dirt that could weaken its hold.
- Use your fingernail or a small flat tool to gently pry the top of the Popsocket away from your phone. Do not use too much force or twist it as this can damage the phone or the Popsocket.
- Once you’ve created enough space between the Popsocket and the phone, gently lift it up using your fingers. Again, do not use force as this can damage the adhesive or your phone.
- If there is any adhesive residue left on your phone, use rubbing alcohol to remove it. Make sure to let the area dry completely before applying a new Popsocket.
How to Remove a Pop Socket Base?
Removing a Popsocket base can be tricky, but it’s not impossible. Here’s a step-by-step guide on how to safely and quickly remove a Popsocket base:
- Start by cleaning the area around the Popsocket with rubbing alcohol. This will ensure that the adhesive is free of any oils or dirt that could weaken its hold.
- Try to loosen the adhesive by applying heat. You can do this by using a hairdryer on the low setting and directing the heat towards the base of the Popsocket for a few seconds. Be careful not to overheat the area or damage your phone.
- Use a plastic card, such as a credit card, to slide underneath the base of the Popsocket. Gently move it back and forth until you feel it loosen.
- Once you’ve created enough space between the Popsocket base and the phone, gently pry it off using your fingers. Do not use too much force, as this can damage your phone or the Popsocket.
- If there is any adhesive residue left on your phone, use rubbing alcohol to remove it. Make sure to let the area dry completely before applying a new Popsocket.
It’s important to note that the Popsocket base is not reusable, and you will need to replace it with a new one if you want to use your Popsocket again. The good news is that replacement bases are readily available and easy to find online or in stores.
How to Remove a Pop Socket Adhesive?
Here, are the following Steps to remove the Pop Socket Adhesive,
- Start by cleaning the area around the Popsocket with rubbing alcohol. This will ensure that the adhesive is free of any oils or dirt that could weaken its hold.
- Use a plastic card, such as a credit card, to gently pry the Popsocket away from your phone. Move the card back and forth until you can feel the adhesive start to loosen.
- If the adhesive is particularly stubborn, you can try using dental floss or fishing line to saw through it. Wrap the floss or line around the base of the Popsocket and gently saw back and forth until you feel it loosen.
- Once you’ve created enough space between the Popsocket adhesive and the phone, you can try pulling it off with your fingers. If it still won’t come off, try using a plastic spudger to gently pry it away from the phone.
- If there is any adhesive residue left on your phone, use rubbing alcohol to remove it. Make sure to let the area dry completely before applying a new Popsocket or any other adhesive.
Tips and Tricks for Removing PopSocket
If you have trouble removing the Popsocket with a plastic card, try using dental floss instead. Slide it under the base of the Popsocket and gently move it back and forth until you feel it loosen.
If you plan on reusing the Popsocket, make sure to save the original adhesive base. You can clean it with rubbing alcohol and reuse it on a new phone or phone case.
If you have difficulty removing the Popsocket, try warming the adhesive with a hairdryer for a few seconds. This will make it easier to remove.
FAQs
If you follow the instructions carefully and do not use.
It is recommended that you replace your Popsocket every six months to ensure maximum adhesion.
Following tips to remove the Pop socket from your phone
1. Push down the top of a pop socket when it is expanded.
2. Use fingernails to get under the base of the pop socket.
3. Gently pull off the pop socket from the phone.
